Icons Logo

Icons Logo

Friday, January 11, 2013

Icons Star Wars Lightsaber Chest Prototype

Here we have a new addition to the Icons Museum of Paris, France. A rare Icons prototype that took a few years to negotiate for and acquire, and one that has been largely un-seen by most Star Wars and Icons collectors.

This is the original, Icons Star Wars Lightsaber Chest prototype, produced 18 years ago in 1995. This is a highly unusual piece for a few reasons, as it was fabricated very early on during Icons first year of business, and before the company had a location and a formal, organized, professionally supervised creative development and art department.


The initial goal was to fabricate a precise, down-sized replica of the lightsaber chest seen in the first Star Wars film (1977), which Obi-Wan Kenobi used to store away Luke Skywalker's father's lightsaber, the sophisticated weapon of a Jedi, which Obi-Wan (portrayed memorably by acclaimed British actor, Alec Guiness) presents to a young and ambitious Luke Skywalker during a memorable scene in the movie ("Your Father wanted you to have this when you were old enough"). Although the screen-used chest would have been too large to replicate and impractical for collectors, as it was a larger trunk-like chest, Icons had intended on producing a smaller-scale chest, based on the one seen in the film. A chest that collectors could use to hold and display two Icons prop replica lightsabers. A Skywalker and a Darth Vader saber.

Icons co-founder and Vice President Jim Latta retained production illustrator & graphic artist Daren Dochterman (they had met and worked on James Cameron's motion picture The Abyss prior to working together at Icons) to render an illustration of the proposed lightsaber chest, of which the Icons Museum is proud to have the original illustration as part of its permanent collection. Shown here :


During this time, Icons co-founding partner and V.P. of Manufacturing Mike Moore (1995-1997) was still working in the Film & TV prop industry making props, and was phasing out of his partnership at Prop'er Effects. Mike and his staff at Prop'er were still consistently fabricating props for the various Star Trek television shows and feature films and between these projects Mike and his team would work on Icons prototypes as Icons being founded.

Icons co-founder and CEO/President Doug Conway (1995-1998), Latta and Moore agreed that the Obi-Wan Kenobi chest replica would make for a great replica to offer to collectors who purchased the proposed Icons lightsabers, so prior to Latta writing the licensing proposal for Lucasfilm Ltd. it was decided that the saber chest would be one of the first prototypes submitted to Lucasfilm Ltd. along with Icons Skywalker and Darth Vader 1:1 scale lightsabers.


The chest was put into active fabrication and due to Mike Moore's busy schedule, he out-sourced the fabrication to a fellow professional prop-maker who had worked with Moore on various Star Trek projects. The prop-maker proceeded to hand-craft the lightsaber chest, while not referring to Dochterman and Latta's concept of the Obi-Wan style chest used in Star Wars : A New Hope. Not surprisingly, the chest became greatly influenced by the concept design styling of the Star Trek franchise !!

When the piece was completed and presented at Icons, although Latta admired and respected the quality of the craftsmanship, he was not pleased with the prototype, as it was not what was expected, having not been based on the Obi-Wan chest seen in the film nor the Dochterman concept drawing of the smaller proposed replica chest.

The prototype had already been promised to Lucasfilm so the decision was made by Conway, Latta and Moore to submit the piece to Lucasfilm Ltd. and it did not have an impact on Icons being granted the first ever Star Wars prop replica license.

Interestingly, the design of the saber chest seems like it could have been used in the 2nd trilogy of the Star Wars films, as it is more like the futuristic, streamlined production design seen in Star Wars : The Phantom Menace, The Clone Wars and Revenge of the Sith.


Star Wars expert and author Stephan Sansweet actually delivered the Jedi lightsaber chest to Lucasfilm Ltd. on Icons behalf. This was directly following a memorable visit to Sansweet's Star Wars memorabilia filled home, by many of the original cast members of Star Wars, who Icons represented for personal appearances, through the now legendary Men Behind the Masks world tour.
 
Sansweet's sanctioning of the Icons Star Wars prop replica license was critical to the company being awarded it. In september of 1995, Lucasfilm Ltd. agreed to grant Icons the exclusive license to create an authentic, limited edition, authorized product line of 1:1 scale props from the Star Wars Trilogy.

Thursday, January 10, 2013

Icons Star Wars Darth Vader Lightsaber


This one is the first licensed Darth Vader lightsaber prop replica ever manufactured by a Lucasfilm Ltd. licensee. It is numbered #AP01 on its original, all metal, stamped plaque (displayed here with a James Earl Jones Signature Edition plaque #0002).

 
It was THE first Darth Vader lightsaber that was assembled from Lucasfilm Ltd. licensed, authorized, approved and authenticated parts.

 
This specific saber was manufactured and then presented to the executive management and co-founders of Icons Authentic Replicas for approval in order to "green-light" the mass production of over 7,000 Darth Vader lightsaber prop replicas.


This is a "test proof comp" of the first Star Wars Darth Vader lightsaber advertisement.

Wednesday, November 28, 2012

Icons Star Wars Obi-Wan Kenobi Lightsaber



Here is the first Lucasfilm Ltd. licensed Star Wars Obi-Wan Kenobi lightsaber (#01 of an intended 10,000) ever produced, authorized, approved and licensed by Lucasfilm Ltd.


I would assume that the photo above is a test photo once the #01 saber was completed to size the plexiglas case and plaque etc.


The saber also comes with a final, unnumbered, LFL approval plaque, bought directly from Mike Moore.


Those schematics were for the company that produced the outsourced parts for the saber.

Monday, November 19, 2012

Icons T2 T1000 Broken Claw



That "hook" was certainly made during Icons transition period to Timeless Collectibles. The Hand-Claw was in development at Icons, on the drawing boards but sadly, just never got produced.


Al Zequeira molded it (with the Endo Skull CPU Chip and the Stabbing Finger) in James Cameron's Office at Lightstorm in Santa Monica (he had to do it there as Lightstorm execs wouldn't let anything out !!) and Timeless Collectibles made it.



Tuesday, September 11, 2012

Icons Star Wars Lightsaber Plaques Sheet Prototype



This is an un-cut, un-painted, all metal, sheet of 12 original Icons Star Wars Lightsaber plaques (including 6 Skywalker and 6 Darth Vader), with ink test markings made by the Icons creative and art department during the final stages of prop replica plaque design and development.

As you can see, the Vader plaques are some kind of prototypes or early design plaques as the final ones didn't retained the "S" after Vader's name. 

Sunday, August 12, 2012

Icons Star Trek Klingon Disruptor Replica



This is a stunning and very rare display piece celebrating the legacy of the Star Trek universe made by Icons in 1998.


This is the 1st ever produced, Paramount Studio's licensed Klingon Disruptor prop pistol.

As most collectors know, only a few dozen of these were ever produced by Icons, before the company closed its doors forever.


This is a picture of James Latta after one week of sanding the TOS Klingon Disruptors they were re-tooling....

Sunday, July 29, 2012

Icons Robin's Throwing Bird



This is the Robin's Redbird replica from the movie "Batman & Robin". This is number #154.


Here is what Larry Taylor can tell us about that replica : "Oh boy, do I remember those things...Jeeeze what a production nightmare...nothing lined up, the fitment was horrible...alot of the wings wouldn't open out because of warpage.
Consider yourself very lucky Fred that you have one because a lot of them didn't make it out because of these issues. It's a great looking piece".

"It was just taken away from us by Warner Brothers so we couldn't finalize an accurate reproduction of it from the prototype and that's the reason why it had issues but some did make it out as is yours did and those were the good ones". Thank you Larry.


Al Z. adds : "It was definitely one of those props that was made just for the movie and not for the real world. People kept opening and closing the wings over and over again and after just a few times they would tend to pop off because they weren't designed to be used in the real world.
Had we had time to re-engineer it just a little better I think it would have made a very big difference".

"But Warner Brothers was very insistent that it get done ASAP....I also remember them coming in when we would do deliveries and supposedly DNA marking them so that they could not be bootlegged. Not that I think anybody would have". Thank you Al.



Then we have hand-made drawing prototypes of the piece, rendered by Daren Dochterman.


That one above is a concept advertisement for the Icons "Batman & Robin" replicas. It's interesting and funny to see the movie and Icons logos melted together !!


Here are some early concept COAs for the Throwing Bird.


Some other early concept COAs with Warner Bros. Studio annotations.


Another serie of COA prototypes.


Final test versions for the Redbird COA.


This is an early 
prototype plaque : as you can see, there are no trademarks (TM) after each line and logo, and it is "The RedBird" which will finally become "Robin's Throwing Bird" on final pieces !!!